Concrete marble granite decorative portable sandblasting system Vac-n-Blast

Home | Uses | Safety Information | Specifications | Contact Us

Model 2012 Specifications

Automatic Air Pulse System
- Continually Cleans Filter by set timer.
- Adjustable Timer.
- Cleans without shutting down system.

Dust Collection Filter
- Efficiency up to 99.3% at .3 microns.
- Washable Exterior.
- Fire Retardant.
- Teflon coated filter. Dirt and debris will not stick versus bag filters that can tear or wear.
- Self cleaning with air pulse system.
- Anti-static.

Vacuum and Motor
- 16 amp motor. DC Brushless Motor so it does not wear like regular brush motors which are standard. Rated for 5000 hours compared to 500 hours of a brush motor.
- Runs on 120 volt.

Machine
Thompson Valve II Metering System – Best on the market and most up to date for adjusting blasting media for wear ability since it is Tungsten lined.
- 1 cubic foot LAGRANGE Pressure Pot that refills automatically when trigger is released and has access door. You do not need to stop machine like others in the market. Maximum PSI on pot is 115.
- Easy to use dust clean out compartment with one clamp removal
- Large Pneumatic casters and tires for easier transportation with wheel locks.
- Wilkerson Strainer Dryer – High quality to minimize moisture in machine in order to prevent clogging.
- Liquid Oil Filled Pressure Gauge – High quality gauge. Liquid filled gauge typically last as longer than air filled pressure gauge. More accurate and dependable.
- Quick Connects for all hoses for ease of use.
- Built in Storage Bin for hoses or tools.
- Brushless Switched Reluctance Design on motor.
- Light weight at 400 pounds
- Apollo Control Valves
- Safety Rail to protect valves.
- 3/16” Air Nozzle
- All clamps are stainless steel and carry a lifetime warranty from manufacturer.

CFM Requirements
- Average CFM compressor needed of around 25 CFM. 20 to 40 CFM Compressor is ideal. Our Boss Compressor is rated for 70CFM, which is more than adequate.
- Pull behind compressors must be used some type of regulator to down grade the amount of CFM. Oversized compressors may harm the machine.

PSI Requirements
- Machine will run on various PSI setting which can be adjusted by your regulator pressure gauge. On average, we have been using the machine between 50 to 75 PSI depending on the material you are blasting.

Safety Features
- Secure Safety Trigger will not activate unless manually pressed.
- Screened media fill area with screen that allows 60 grit size media or smaller in diameter (70, 80, etc.).
- Hose whips for all air hoses coming off machine for if they were to come loose.